Descriere
| Power
Ratings |
FFA-5004 HD:
4 x 1250W ref 4 Ohms, 4 x 625W 8 Ohm Note: Channel pairs can be bridged to drive very high power 8 Ohm subwoofers |
| Gain | FFA-5004 HD – 20dB |
| THD | THD+N Typical 0.05 4% Ohm 1kHz |
| Frequency
Response |
20Hz – 20kHz +- 0.5dB |
| Controls | 40 Point Potentiometer per channel, power on switch |
| Indicators | signal green = -20dB, signal yellow = -3dB, red signal = clip, signal red protect = over current, low AC mains or 3 sec. mute on power up |
| Load
Protection |
DC on output, precision clip limiter circuit |
| Amplifier
Protection |
Short circuit, current overload, thermal shutdown, high frequency stability circuit |
| Audio Signal
Inputs |
Balanced Neutrik® Female XLR input connected Pin 1 – GND, Pin 2 – Hot +, Pin 3 – Cold – . |
| Audio Power
Outputs |
Neutrik® speakON each channel. Channels 1 and 3 output speakON utilises 2+ and 2- connection to allow use of 4 core loudspeaker cable for bi amp loudspeaker system. Bridged output |
| Power
Requirement |
1 x Neutrik® 20A powerCON connector 1 x 16A 230 VAC Circuit. Power range 185V-230VAC
120V (configured at factory) |
| System
Cooling |
High CFM 80mm fan with proportional signal speed control. Rear to front airflow |
| Dimensions | 88mm Height x 483mm Width x 510mm Depth. Includes rear rack support. 19″ rack mount enclosure |
| Weight | 10 kg |
Recenzii
Nu există recenzii până acum.